Submit an Article

Optics
Special Issue

Optical Techniques for Deformation, Structure and Shape Evaluation

  • Submission Deadline: 30 March 2015
  • Status: Submission Closed
  • Lead Guest Editor: Qinghua Wang
About This Special Issue
There has been a growing demand for non-destructive quantitate evaluations with the development of materials science and integration technology. Optical technology shows its unique superiority in performance evaluations of materials and structures owing to the non-contact characteristic. This special issue welcomes research and review papers related to optical techniques and apparatus for non-destructive evaluations of deformation, structure and shape. We are particularly interested in new optical methods, developed optical instruments, typical applications in the fields of materials science, aerospace, electronics, biology, medical science, oceanography and other industrial areas.

Expected topics include, but not limited to:

1) Optical methods and apparatus, such as laser interference, moiré methods, the digital image correlation method, electronic speckle pattern interferometry, the grid method, geometric phase analysis, holographic interferometry, holo-photoelasticity, etc.

2) Fabrication techniques deformation carriers, including regular patterns (grating, grid) and random patterns (speckle) at different scales

3) Measurement accuracy improvement techniques, such as phase shifting, image processing, using ultraviolet light or X-ray, etc.

4) Measurement in unconventional environments, such as micro/nano scales, high temperature, dynamic state, vibration, curved surface, three dimensions, etc.

5) Applications in deformation measurement, mechanical properties evaluation, structure characterization, shape measurement, defect detection, surface flatness assessment, interfacial bonding strength estimation of various materials and structures.
Lead Guest Editor

  • Qinghua Wang

    Research Institute of Instrumentation Frontier, National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba, Japan

Guest Editors

  • Yanjie Li

    School of Civil Engineering and Architecture, University of Jinan, China

  • George Jandieri

    Special Department, Georgian Technical University, Tbilisi, Georgia

Published Articles

  • Deformation Measurement Method Using Moiré Fringes at High Scanning Speed Under a Laser Scanning Microscope

    Qinghua Wang , Shien Ri , Hiroshi Tsuda , Takashi Tokizaki

    Issue: Volume 4, Issue 3-1, June 2015
    Pages: 43-49
    Received: 31 March 2015
    Accepted: 31 March 2015
    Published: 14 March 2016
    DOI: 10.11648/j.optics.s.2015040301.20
    Downloads:
    Views:
    Abstract: A full-field deformation measurement method using moiré fringes generated at high scanning speed under a laser scanning microscope (LSM) was proposed. The formation principle and the deformation measurement principle were presented. Simulation and experiment verifications were performed to show the effectiveness and the accuracy of the proposed fas... Show More
    Download PDF
    View Online

  • Fabrication of Micro-Scale Speckles with Particle Dispersion Method

    He Guanglong , Zhu Jianguo

    Issue: Volume 4, Issue 3-1, June 2015
    Pages: 39-42
    Received: 12 March 2015
    Accepted: 8 June 2015
    Published: 20 January 2016
    DOI: 10.11648/j.optics.s.2015040301.19
    Downloads:
    Views:
    Abstract: Micro-scale speckles with particle dispersion method are fabricated as the deformation carriers in the digital image correlation method. Micro-scale carbon particles are mixed with epoxy resin proportionally, followed by solidifying, centrifugal and spinning. In the end, a speckle film can be fabricated, which can be transferred to the surface of s... Show More
    Download PDF
    View Online

  • Residual Stress Measurement in Si-based Multilayer Structure by Micro-Raman Spectroscopy

    Wei Qiu , CuiLi Cheng , Yu Cheng Zhao , Qiu Li

    Issue: Volume 4, Issue 3-1, June 2015
    Pages: 33-38
    Received: 20 March 2015
    Accepted: 8 July 2015
    Published: 29 November 2015
    DOI: 10.11648/j.optics.s.2015040301.18
    Downloads:
    Views:
    Abstract: Si-based multilayer structures, such as porous silicon (PS) and germanium silicon (ε-Si), are widely used in current microelectronics and Micro-electromechanical Systems (MEMS). During the preparing process of Si-based multilayer structures, some inhomogeneous residual stress is induced, maybe finally leading to structure failure. Micro-Ram... Show More
    Download PDF
    View Online

  • Residual Stress Measurement in Micro-region Using Digital Image Correlation Method

    Yanjie Li , Guang Han

    Issue: Volume 4, Issue 3-1, June 2015
    Pages: 29-32
    Received: 29 March 2015
    Accepted: 15 July 2015
    Published: 2 September 2015
    DOI: 10.11648/j.optics.s.2015040301.17
    Downloads:
    Views:
    Abstract: The residual stress of the zirconia film on a stainless steel substrate is measured using the digital image correlation (DIC) method. A lattice structure is milled by focused ion beam (FIB) and used as the deformation carrier. An annular groove is etched by FIB in order to release the residual stress. The DIC method is used to calculate the deforma... Show More
    Download PDF
    View Online

  • Virtually and Depth Sensor Generated Moire Pictures in Screening and Treatment of Scoliosis

    Akos Antal , Attila Katona , Peter Major , Jozsef Molnar , Norbert Szakaly , Peter Tamás , Klara Wenzel

    Issue: Volume 4, Issue 3-1, June 2015
    Pages: 24-28
    Received: 30 March 2015
    Accepted: 26 July 2015
    Published: 7 August 2015
    DOI: 10.11648/j.optics.s.2015040301.16
    Downloads:
    Views:
    Abstract: In this paper, different moiré picture generation techniques are presented. This paper presents the basics of moiré effects, a virtual way of moiré generation, depth sensor based moiré picture generation and usage. One of the most common advantages of these methods is rapidity. The computer generated moiré pictures provide an opportunity of screeni... Show More
    Download PDF
    View Online

  • Calibration of a Fringe Projection 3D Measurement System Using an Equi-Phase Coordinate Method Based on Two-Reference-Plane

    Dai Meiling , Yang Fujun , He Xiaoyuan

    Issue: Volume 4, Issue 3-1, June 2015
    Pages: 18-23
    Received: 23 March 2015
    Accepted: 25 March 2015
    Published: 28 July 2015
    DOI: 10.11648/j.optics.s.2015040301.15
    Downloads:
    Views:
    Abstract: Calibration is to transform the 2D phase information to the world coordinates in a fringe projection 3D measurement system. For the phase-to-height conversion, an equi-phase coordinate method based on two-reference-plane is proposed in this paper. The surface height is calculated by a linear interpolation using the coordinates where have the identi... Show More
    Download PDF
    View Online

  • Measurement of Distortion Using the Moire Interferometry

    K. Wenzel , Gy. Abraham , P. Tamas , A. Urbin

    Issue: Volume 4, Issue 3-1, June 2015
    Pages: 14-17
    Received: 30 March 2015
    Accepted: 12 July 2015
    Published: 25 July 2015
    DOI: 10.11648/j.optics.s.2015040301.14
    Downloads:
    Views:
    Abstract: Image forming lens systemsdo not provide perfect images. Lens abberations can be detected with complex optical ray-tracing. A single aberration in lenses, the distortion, can be detected at the image plane with optical mapping. Therefore moiré interferometry can be adapted to detect and measure distortion. This method is adaptable by serial testing... Show More
    Download PDF
    View Online

  • Full-Field Displacement Measurement Technique by Using Repeated Patterns and JPEG Compressed Images

    Shien Ri , Satoshi Hayashi , Hiroshi Tsuda , Shinji Ogihara

    Issue: Volume 4, Issue 3-1, June 2015
    Pages: 9-13
    Received: 27 March 2015
    Accepted: 26 June 2015
    Published: 6 July 2015
    DOI: 10.11648/j.optics.s.2015040301.13
    Downloads:
    Views:
    Abstract: This paper presents an experimental technique for measuring displacement distribution from an image of repeated patterns and JPEG compressed images. The measurement accuracy of the developed method is insusceptible to the degree of JPEG compression because only lower spatial frequency components of the repeated pattern are used to calculate the dis... Show More
    Download PDF
    View Online

  • Fabrication of Micro-grating Structure by Nanosecond Laser

    Yanlong Huang , Jianguo Zhu

    Issue: Volume 4, Issue 3-1, June 2015
    Pages: 5-8
    Received: 23 February 2015
    Accepted: 30 March 2015
    Published: 12 May 2015
    DOI: 10.11648/j.optics.s.2015040301.12
    Downloads:
    Views:
    Abstract: The fabrication method by nanosecond laser technology for micro-grating is investigated in this paper. A nanosecond laser system is established and the mechanism of laser processing on material surface is theoretically analyzed. The damage threshold of stainless steel is obtained experimentally when the nanosecond laser irradiates on the specimen’s... Show More
    Download PDF
    View Online

  • Residual Stress Measurement of an Interference Fit Specimen Based on Moiré Interferometry and Hole-Drilling Method

    Baoge Zhang , Jianguo Zhu

    Issue: Volume 4, Issue 3-1, June 2015
    Pages: 1-4
    Received: 16 February 2015
    Accepted: 23 March 2015
    Published: 12 May 2015
    DOI: 10.11648/j.optics.s.2015040301.11
    Downloads:
    Views:
    Abstract: In this paper, moiré interferometry is combined with hole-drilling method to measure the residual stress of an interference fit specimen. And, finite element method is used to calibrate the coefficient of hole-drilling method. The experimental results are consistent with theoretical results, which manifests that moiré interferometry combined with h... Show More
    Download PDF
    View Online

About Us

Science Publishing Group (SciencePG) is an Open Access publisher, with more than 300 online, peer-reviewed journals covering a wide range of academic disciplines.

Learn More About SciencePG

Products

Information

Important Link

Copyright © 2012 -- 2025 Science Publishing Group – All rights reserved.